250ml Pet Bottle Packing Flavor Mango Juice Processing Line 4000 Bottles Per Hour

item

1.5mm for small diameter(1.25”,1.5”,2”)
2.0mm for big diameter(>2”)

Ø Rated capacity: 500L;

Ø Adopt jacket type square structure

Ø The surrounding R-shaped arcs are excessive and have no dead ends, and the mixing is more uniform;

Ø Sugar melting time: about 5-20min/time, the specific time needs to be determined according to the characteristics of different materials;

Ø For quick dissolution of excipients and sugar

Ø Flow: 3t/H;

Ø Head 36m;

Ø Stainless steel material

Ø With Guide roller

Ø Rated flow: 3T/H

Ø Filtration precision: 150-200mesh

Ø Quick detachable structure with pressure gauge

Ø SS304 material

• Capacity: 2500L
• 304 stainless steel material;
• inner wall 3.0mm, middle 50mm polyurethane foam, outsourcing 1.5mm
• Paddle stirring;
• The outer surface adopts 2B sheet;
• Liquid level pipe, temperature gauge;
• Conical top and cone bottom structure, cone bottom 15℃, including manhole, vent cap, cleaning ball, water inlet, material inlet and outlet, sampling valve, glass sight tube;

Ø Flow: 3t/H;

Ø Head 36m;

Ø Stainless steel material

Ø With Guide roller

Ø Rated flow: 3T/H

Ø Filtration precision: 150-200mesh

Ø Quick detachable structure with pressure gauge

Ø SS304 material

Homogenizer

• Pressure: 0-40Mpa
• Output: 2000L/H
• Pressure control adopts two-pole mechanical pressure regulation, which is convenient to adjust, safe and reliable;
• Plunger adopts wear-resistant alloy, sprayed alloy and new ceramic technology, which has the characteristics of corrosion resistance and wear resistance;
• The high-pressure seal of the plunger adopts the form of self-expanding ring and V-shaped seal, which has a long service life;
• Crankshaft transmission adopts one-stage transmission mode, with stable operation, small power loss and low noise;
• The main parts are made of stainless steel and corrosion-resistant alloys, which meet the requirements of food hygiene;

Vacuum Degasser

Ø Output: 2000L/H

Ø Made of 304 stainless steel 4mm;

Ø Using high-end vacuum pump to achieve vacuum in the tank;

Ø Vacuum pressure can be displayed;

Ø Material conveying adopts rotor pump

Ø Amount of cooling water: 0.1-0.2T/H;

Ø Installed capacity: 3.75KW

Ø CIP cleaning head, liquid level display, drain valve, feed port

Ø Special tubular structure, specially used for juice materials;

Ø Capacity:2T/H;

Ø Material inlet temperature: 40℃~50℃;

Ø The material outlet temperature is less than 40℃;

Ø Sterilization temperature: 95℃~121℃;

Ø Sterilization time: 10S;

Ø Cooling water temperature <30℃

Ø The main features of the system are as follows:

Ø Rated processing capacity

Ø Cooling water consumption: 30 tons/hour, the water temperature is less than 30 degrees Celsius;

Ø System pressure: about 50BAR

Ø One screw pump, one hot water pump, one CIP pump

Ø Front 100L material buffer tank;

Ø Plate Heat Exchanger, sealed water tank with sterilization pump

Ø Independent control cabinet, IP protection, man-machine interface PLC

Ø Siemens PLC, Siemens touch screen

Ø Schneider, Omron low voltage components, Japan Fuji temperature controller

Ø Taiwan AirTAC pneumatic components

Ø Steam valve group: pressure reducing valve, filter, regulating valve, globe valve, steam trap